Birch Garage Door Operational

Replacement of the Birch building garage door and operator was completed and the garage can once again be accessed by vehicles.  Unfortunately, there has been a delay in connecting access controls and for the time being the door must be operated with the wall mounted controls on the inside of the garage.

Sorry for the inconvenience and thank you for your patience.

Garage Door Replacement: November 22 & 23

A reminder that replacement of the parking garage door including the operator and access controls is scheduled for November 22 & 23.

For the duration of the work there will be restrictions on vehicles being able to enter and exit the parking garage.  If you may require use of your vehicle while the work is carried out it is highly recommended you remove it from the garage for the duration of the work.

The existing remote-control access system will be replaced by a keypad entry / automatic exit system.  Each unit will be provided a random 4-digit code for entry to the garage as well as entry through the front door of the building.  If you have provided us consent to deliver records to you via email, you will receive the new code along with instructions on using it by that method.  If you have not provided us consent to deliver records to you via email your code will be sent through regular mail to your residential address on record.

Thank you for your co-operation.

Carpet Cleaning Rescheduled: Birch Building

Carpet cleaning for all common areas will begin in Birch building is scheduled for November 27th, 2018.  If all areas cannot be completed that day the remainder will be done the following day.  A “low moisture” process will be used which is expected to dry in about an hour.  Sorry for any disturbance this causes, thank you for your understanding.

Reminder To Maintain Heat

Freezing temperatures have arrived once again, and with them we remind everyone of their responsibility to adequately heat their unit.  Failure to provide adequate heat can result in frozen/burst pipes and extensive damage to your unit, your neighbour’s units and common areas, and leave you financially responsible for the resulting losses and repair work.  Please take the time to consider and implement the following when your unit is vacant.

  1. Keep your PTAC unit on and switched to “heat” at a low temperature.  This unit is the primary source of heat for the central area of your unit so do not unplug it.  Some PTAC models have a freeze protection feature, but it is highly recommended you do not rely on this feature as an alternative to the unit being on and the thermostat set low.
  2. Keep all your electric baseboard heaters on and set low.  In the event of a PTAC failure (or vice-versa for that matter) having both systems on could prevent freezing temperatures, at least until the failure is discovered.  Turn the thermostat knob on each baseboard heater counter clockwise until it you feel it click (it has tripped on at current room temperature), then turn it back 1/8 to 1/4 turn to set it low.
  3. Have someone routinely check on your unit.  If you do not have a friend, neighbour or such who would do so there are paid services available in the area to do this.  Depending on your property insurance provider there will be a maximum number of days your unit can remain vacant without being checked.

Thank you for your diligence in keeping yourselves and your neighbours protected from the perils of frozen pipes!